It’s always a sad day when the snowboarding season comes to an end, knowing during those last few runs, through muddy slush, it will be nearly half a year before you get to board again. With next season in mind, before you break out the mountain bikes, surfboard, wakeboard or whatever it is you do during the summer months, you need to store your gear properly. That means spending a little time snowboard waxing for summer storage.
Now, I don’t want to sound too much like your mum telling you to clean your room but if you don’t take the time to store your gear correctly then you’re going to pay for it down the line. Dry bases, rusted edges, delamination and loss of camber can all happen when you toss your board in the garage or shed over the summer. And it really only takes a few minutes to give it the necessary protection. A thick, sloppy coat of good quality wax is all it takes to keep your kit in top condition. Here’s how to do it.
Snowboard waxing for summer storage
1. Give the base a good clean. At the end of the season the snow can get quite dirty and a lot of that filth will find its way onto your board and into the pores. I personally use a home made citrus cleaner (all you need is some citrus fruit skins, white vinegar and 2 weeks ‘brewing’) as its eco-friendly. You can buy a cheap environmentally friendly citrus cleaners online if you don’t fancy making it yourself. Just use an old rag to work the board and keep going until it is clean.
2. This is an optional step that I tend to skip and really depends how dirty your board is. If like me you don’t live in resort so most seasons you don’t ride until the last day then you can probably skip it. To help further clean the board apply a normal amount of mid-temp wax evenly across the board but scrape it off while it is still hot, you will notice oily residue in the wax scraping.
3. Using a hydrocarbon wax, cover the entire surface of the base. Use a soft, iron-on wax and then let it cool without scraping. This kind of snowboard waxing for summer storage will hold the moisture in the base and prevent it from drying out.
4. Cover the edges with wax. You might already have enough wax on you board from the first application, but if not, slap a bit more on and make sure it is adhering to the steel. The aim is to prevent the steel oxidizing (that’s rusting to you and me) as once this process starts it can work its way further and further into the board, where even filing won’t be able to stop it.
5. Cover your bindings as much as possible, using some old plastic bags (let’s think about the environment here a little) and tape down to the surface of the board. Remember that stopping air getting in is the key.
6. Store all your gear in a dry and clean place, away from the damp and excessive heat if possible, so common storage spots such as a basement or loft should be avoided. And remember to have a check every now and then over the summer. The last thing you want is to get all excited about the new seasons only to find your board rusted and un-ridable on the morning of your first shred next season.
What snowboard wax do I use?
I like to use Green Ice Wax because its been specifically designed to be environmentally friendly and protect the health of the user and the planet – I am not a full on tree hugger but there is certainly a bit of an eco-warrior in me. Seriously though, when you can, it’s always best to use environmentally friendly products with the fewest nasty chemicals possible. After all, if you wouldn’t rub it on your skin, why rub it on your board?
Green Ice Wax is fast, safe and comes in a range of products proven to work in any conditions. And if you need any further proof that Green Ice snowboard waxing for summer storage is a good choice, then the fact pro boarder Nate Holland and pro freeride skier Chris Davenport swear by it should suffice.
You can find out more and order Green Ice wax by visiting their website: www.greenicewax.com